Disassembly And Installation; Handle; Lamp Switch; Wind Passage Cover Assembly And Lamp In Fridge - Haier hrf-660s Service Manual

Hide thumbs Also See for hrf-660s:

Table of Contents

SERVICE MANUAL

Model: HRF-660S

Chapter3 Disassembly and Installation

3.1. Door and handle

1. Loosen the screw by screwdriver, and then remove the

hinge cover from upper way.

2. Loosen the screw fixing the upper hinge to the body and

lift the door.

3. Door gasket can be pulled out from door foam assembly .

4. Fix the bolt into the hole on the door, and then use the

handle aiming to the bolt, push the handle down until it

touch the door firmly.

1. To remove the switch pulls out it with a flat type

screwdriver as shown in.

2. Disconnect the lead wire from switch.

3.3. Wind passage cover assembly and lamp in fridge chamber

1. Unplug the power cord from the outlet;

2. Remove the fridge shelf;

3. Remove the lamp cover ;

4. The bulb can be replaced;

Issue 2010-06-21

Rev. Ref0904S004V1

Table of Contents