Chapter3 Disassembly And Installation; Display Panel Disassembly; Main Control Board And Power Cable Disassembly - Haier RMD52HLCS0 Service Manual

Chapter3 Disassembly and Installation

Note: Unplug the power cord from the outlet when demount the refrigerator.

3-1. Display panel Disassembly

You can aspirate the display panel by using vacuum suction nozzle.
Note: you need to use vacuum suction nozzle in the red zone.

3-2. Main Control Board and Power Cable Disassembly

1. Remove the control board and power cable like picture
Non professionals do not remove the main control board (including open the control box)
1 Check the power supply cable and ensure power off to disassemble.
2 open the main control box by using a plum screwdriver, then you can see all the refrigerator
control board.
3 pull cable plug off on the refrigerator main control board.
4 replace the damaged main control board.
5 cover the main control box, then fixed well with screw.