Connecting The Ipod - Dodge Ram 2010 Owner's Manual

262 UNDERSTANDING YOUR INSTRUMENT PANEL
This feature allows you to plug an iPod
vehicle's sound system through a 16–pin connector, using
the provided interface cable.
UCI supports Mini, 4G, Photo, Nano, 5G iPod
iPhone devices. Some iPod software versions may not
fully support the UCI features. Please visit Apple's
website for software updates.
NOTE:
• If the radio has a USB port, connecting an iPod to this
port does not play the media. For playing an iPod ,
use the separate 16–pin connector port (in the glove
compartment on some vehicles).
• Connecting an iPod to the AUX port located in the
radio faceplate, plays media, but does not use the UCI
feature to control the connected device.
into the

Connecting The iPod

Use the provided connection cable to connect an iPod to
the vehicle's 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
and
iPod is connected and synchronized to the vehicle's UCI
system (iPod may take a few seconds to connect), the
iPod starts charging and is ready for use by pressing
radio switches, as described below.
NOTE:
• You may have to remove the connector pin protection
cap from the 16–pin connector port, prior to connect-
ing the cable.
• If the iPod battery is completely discharged, it may
not communicate with the UCI system until a mini-
mum charge is attained. Leaving the iPod connected
to the UCI system may charge it to the required level.