Table of Contents
Advertisement
Figure 12
Aligning the Lower Dome with the Back Box
Step 4
Snap the lower dome into place, and then move the lower dome latches toward the bubble until you hear a click.
Figure 13
Locking the Lower Dome
Turn the top cover of the lower dome 90-degrees to conceal the dome latches, LED, and service port.
Step 5
Figure 14
Positioning the Top Cover of the Lower Dome
3
Operation
Once the camera is installed, apply power to the camera. The camera will start a configuration sequence: the green LED flashes
five times per second for approximately two minutes, and then turns solid after the boot cycle is complete and the camera is on
line.
8
Advertisement
Table of Contents
