Auto-Calibration Simple - Vision Fitness Simple Owner's Manual

USER ENGINEERING MODE
(SIMPLE Only, Continued)
DEFAULT TIME
P15 represents the program default time. You can modify this time by using
the number keys or the SPEED or ELEVATION arrows. Press and hold
ENTER to save the new value.
AUTO-CALIBRATION
(SIMPLE Only)
DO NOT STAND ON THE BELT WHEN PERFORMING THE AUTO CALIBRATION!
"AUTO" appears in the data window for the auto-calibration function. To
begin auto-calibration, press START. The Treadmill will run through
minimum and maximum speed and elevation. The auto-calibration will
take three to five minutes. When auto-calibration is complete, "End" will
appear in the data window. The Treadmill will reboot and return to the
start-up screen.
EXIT USER ENGINEERING MODE
P16 represents exit mode. When you press ENTER to select the function,
the console performs a reboot, returning to the start-up screen.
42