Remove Or Disable Conflicts - Aztech HW550-3G User Manual

Remove or Disable Conflicts

To make sure the router installation moves on smoothly, you need to remove or disable conflicts that may
interfere the installation. Probable conflicts may include:
•
Internet sharing applications
•
Proxy software
•
Security software
•
TCP/IP settings
•
Internet properties
•
Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the router installation. These
should be removed or disabled before start the installation.
If you have any of the following or similar applications installed on your computer, remove or disable them
according to the manufacturer's instructions.
Internet Sharing Applications
Microsoft Internet Sharing
Configuring the TCP/IP Settings
Check if your computer uses default TCP/IP Settings
To check the TCP/IP properties:
1. Click the Start button, and then click Run. This opens the Run dialog box.
2. Type in ncpa.cpl, and then click OK. This opens the Network Connections in your computer.
3. Right-click LAN, and then select Properties. This opens the Local Area Connection Properties dialog box.
4. Select Internet Protocol (TCP/IP), and then click Properties. This opens the Internet Protocol (TCP/IP)
dialog box.
5. Select Obtain an IP address automatically.
6. To close the Internet Protocol (TCP/IP) dialog box, click OK.
Proxy Software
WinGate
WinProxy
Security Software
Symantec
Zone Alarm
Page 13 of 46
User Manual