Remove Or Disable Conflicts - Aztech DSL5018EN User Manual

U s e r M a n u a l

Remove or Disable Conflicts

To ensure that the router installation moves on smoothly, you need to remove or disable
conflicts that may interfere with the installation. Probable conflicts may include:

Internet sharing applications

Proxy software

Security software

TCP/IP settings

Internet properties

Temporary Internet files
Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software, and firewall applications may interfere with the router
installation. These should be removed or disabled before starting the installation.
If you have any of the following or similar applications installed on your computer, remove or
disable them according to the manufacturer's instructions.
Internet Sharing Applications
Microsoft Internet Sharing
Configuring TCP/IP Settings
Check if your computer uses the default TCP/IP settings.
To check the TCP/IP properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control ncpa.cpl and then click OK. This opens the Network Connections in
your computer.
3. Right-click LAN and then select Properties. This opens the Local Area Connection
Properties dialog box.
4. Select Internet Protocol (TCP/IP) and then click Properties. This opens the Internet
Protocol (TCP/IP) dialog box.
5. Select Obtain an IP address automatically.
6. Click OK to close the Internet Protocol (TCP/IP) dialog box.
7. Click OK to close the Local Area Connection Properties dialog box.
Proxy Software
WinGate
WinProxy
Security Software
Symantec
Zone Alarm
6