Ⅶ. Brake System Inspection, Adjustment And Replacement - Baotian BT50QT-9 Service Manual

VII. BRAKE SYSTEM INSPECTION, ADJUSTMENT AND REPLACEMENT
1. Front brake (disk brake)
Remove the bolts linking brake caliper and
front shock absorber;
Remove brake caliper.
* Do not pull brake lever when brake caliper is
removed so as to prevent jamming of brake
block.
If brake block is jammed, pry it with
screwdriver and push piston back into caliper.
Brake Block Replacement:
Brake block must be replaced when it is worn
to the limit of use.
* It is not necessary to remove brake oil pipe
when replacing brake block.
* Brake block must be replaced as a set.
Remove the brake block pin by means of a
hexagon wrench.
Return brake caliper left part counter-clockwise,
remove old brake block and mount new brake
block.
Effect mounting in an order reversed to that of
dismounting.
7
brake caliper
bolts
front shock absorber
brake caliper
brake block
brake block pin
brake caliper left part