Table of Contents
Advertisement
Before connecting connectors, confirm that they are free from breakage, bending, over
length or loosening.
Connectors must be inserted home.
When connecting connectors with locks, confirm that their locks are fastened.
Confirm that the wires are not loose.
Confirm that connectors' plastic sleeves completely cover the connectors without fail.
Before connecting the connectors, confirm that their sleeves are free from breakage and
their terminals are not oversized.
Connector plugs must be fully inserted.
Confirm that plastic sleeves completely cover the terminals.
Plastic sleeves should not be placed with the open side up.
Wire bunch bands should be fixed at the specified position of motorcycle frame.
Wire clamps must correctly keep wires in place.
Avoid welding stains of welded clamps when clamping wires.
Wire bunches must be fixed away from turning or moving parts.
Do not damage the covering of wire bunches.
In case of wire bunch defects, remedy it with insulating bands.
Wire bunches must not be covered with mounted parts.
Do not twist or bend cables by force. Deformed or damaged cables would result in poor
rotation or damage.
III. SPECIFIED TORQUES
Torques at important positions and standard torques of other positions are as follows:
12
Hide quick links:
Advertisement
Table of Contents
