Page 2
Preface Thank you very much for purchasing ‘BAOTIAN’ brand motorcycle of model BT50QT-11E, which developed by BAOTIAN MOTORCYCLE INDUSTRIAL CO., LTD. And welcome to join the driver’s line of BAOTIAN motorcycle. With its extraordinary advantages of excellent quality, smart appearance and shape of legerity, our product will surely bring the utmost pleasure and convenience to your life.
□Guidance Please keep safety in your mind and observe the regulations of transportation while enjoying your riding. Pay attention to the following rules: 1. Pre-riding inspection Please read the details in the relevant chapter for your safety. 2. Helmet Do remember to wear helmet while riding. WARNING 3.
Page 5
Positions of the numbers The frame number and the engine number are for the purpose of registering the motorcycle. When your motorcycle needs inspection, repair or other special service, the number will enable you to get good service from our sale agency. Please note down your number here: frame number engine number...
□ Controlling parts 1. Rear brake lever B. Turning signal switch Hold it tightly and the rear brake works. Left turning light Right turning light C. Switch for high/low beam lights 3. Meters and indicating lights A B C 2. Switches on the left Mph Km/h A.
Page 8
4. Front brake lever B. Head light switch Hold it tightly and the front brake works. C. Electric starting button When the ignition switch is at ON position, hold the brake and press the electric starting button and then the engine starts.
□Fuel tank □Fuel and engine oil Usage of the fuel tank lock: A. Gasoline 1. Turn the little cap on the fuel cap. Insert the key and High quality fuel is essential to the engine. turn the key clockwise and take out the fuel cap. Any sand in the fuel is absolutely prohibited.
□Pre-riding inspection Please check the following parts before you drive. Items Inspection content Steering handlebar 1.Flexibility 2.No gap or loosing appearance 1.Travel of the front brake and the rear brake 2.No break on the cable Brake system 3.Flexible function Tires 1.Proper pressure 2.No crack or cutting Fuel...
□Engine starting 3. Engine Starting 1. Please check the volume of engine oil and gasoline before starting. The main stand and the side stand Grip the brake lever and press the starting button and should be taken back while starting the engine. then the engine will be started.
Warning Warning ◆ 5 seconds is the maximum limit for each starting ◆ After the engine started, the starting pedal and10 seconds is the minimum interval. should be taken back to its original position. ◆ Stop pressing the starting button immediately Otherwise, it will affect the driver’s safety.
□Regular maintenance Interval 1000 3000 6000 12000 Item Month New motor Battery Engine oil strainer Gasoline strainer Carburetor Air cleaner core Clean it every 2000km and replace it when necessary Spark plug Clean it every 3000km and replace when necessary Fuel throttle Drive belt Engine oil...
Page 14
1. Battery Warning 12V/5.7Ah battery ① When the voltage is less than 11.5V, please use ◆ It has been fully adjusted to the highest kick starting in stead of electric starting. position when manufactured. ② Put the ignition switch on OFF position before battery replacement.
Page 15
② Press the core to squeeze the detergent out of it by 5. Fuel palms. Never twist it in case that it is broken. Refill the recommended 90# or higher quality ③ Immerse the core into engine oil. lead-free gasoline when the indicating needle in the ④...
Page 16
① Remove the oil dipstick. ②The rear brake (drum brake) ② Remove the oil plug for displacement to drain the Turn the adjusting nut to get a proper travel. used oil. ③ Reinstall the oil plug for displacement, paying attention to be tightened . ④...
Page 17
☆ Disk brake ◆Brake oil level ◆Grip the brake lever and check the wear and tear ① It has been filled with the special brake oil before the indicator. If the indicator nearly touched the brake disc, motorcycle leaves the factory. User should fill or replace please ask the appointed maintainer to change the brake the qualified brake oil (such as No.DOT3 or DOT4 brake blocks.
Page 18
8. Tires 9. Starting motor Insufficient tire pressure hastens wear of them and Check the fastening bolts and the carbon brush, and affects the riding stability. Please check the tire pressure replace them if necessary. and tread depth when applying regular maintenance. ①Tire pressure: front 225 kPa;...
How to change gear oil □Tools Stand up the main stand. A full set of tools is offered for your daily use. Take off the oil plug for refill. Take off the oil plug for draining, let off all the dirty ...