Toyota Rav4 Operation Manual page 109

WWW.MANUALS.WS
Sound balance adjustment function—
This knob is also to adjust the sound
balance between the front and rear, and
the right and left speakers.
For front/rear adjustment, push "AUDIO
CONTROL / MODE" repeatedly until "FAd"
appears on the display. Then turn the
knob to adjust the front/rear balance.
The display will show the range from "FAd
F7" to "FAd R7".
For left/right adjustment, push "AUDIO
CONTROL / MODE" repeatedly until "BAL"
appears on the display. Then turn the
knob to adjust the left/right balance.
The display will show the range from "BAL
L7" to "BAL R7".
CD (Compact Disc)
Push "CD" to switch from radio or cas-
sette operation to compact disc operation.
If the audio system is off, you can turn
on the compact disc player by pushing
"CD". In both cases, a disc must already
be loaded in the player.
When the audio is set into compact disc
operation, the display shows the track or,
track and disc number currently being
played. Each time you push "CD", the
system changes between single disc play-
er and automatic changer.
WWW.MANUALS.WS
Your audio system shows six different dis-
play if the player malfunctions.
If "WAIT" appears on the display, it indi-
cates inside the player unit may be too
hot due to the very high ambient tempera-
ture. Remove the disc or magazine from
the player and allow the player to cool
down.
If "Err 1" appears on the display, it
indicates the disc is dirty, damaged, or it
was inserted up- side down. Clean the
disc or insert it correctly.
If "Err 2" appears on the display, it
indicates no disc is loaded inside the
magazine, insert a disc.
If "Err 3" or "Err 4" on the display, it
indicates there is a trouble inside the sys-
tem. Eject the disc or magazine. Set the
disc or magazine again.
If "OPEn" appears on the display, it
indicates the compact disc auto changer
lid is open. Close the compact disc auto
changer lid.
If the malfunction is not recovered, take
your vehicle to your Toyota dealer.
DISC
Compact disc auto changer only—
By using this button, you can select a
disc you wish to listen to.
'98 Rav4.U
Push the either side of the button until the
number of the disc you want to listen to
appears on the display.
∗
Dolbyr B NR
If you are listening to a tape that was
recorded with Dolbyr B Noise Reduction,
push the button marked with the double- D
symbol. The double- D symbol will appear
on the display. Push the button again to
turn off Dolbyr B NR.
The Dolby NR mode reduces tape noise
by about 10 dB. For best sound reproduc-
tion, play your tapes with this button on
or off according to the mode used for
recording the tape.
∗
: Dolby noise reduction manufactured under license
from Dolby Laboratories Licensing Corporation. "DOLBY"
and the double D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
FM
Push "FM" to switch the FM band. "FM1"
or "FM2" will appear on the display. This
system allow you to set twelve FM sta-
tions, two for each button.
If the audio system is off, you can turn
on the radio by pushing "FM". Also, push
"FM" to switch from cassette or compact
disc operation to radio operation.
109