Mazda RX-8 2009 Service Highlights page 113

PID name
ID_WU2*
ID_WU3*
ID_WU4*
SPODMETER
VBATT
WU1_P*
WU2_P*
WU3_P*
WU4_P*
WU1_T*
WU2_T*
WU3_T*
WU4_T*
* : Data transmission from the wheel unit occurs when the vehicle speed is 25 km/h {15.5 mph} or more. Due to
this, the current air pressure and temperature data can only be displayed after the vehicle is driven at 25 km/h
{15.5 mph} or more. Also, the ID_LAST, and tire pressure and internal tire air temperature data are erased
when the instrument cluster connector and the battery terminal are disconnected. If the instrument cluster is
replaced or the battery terminals are disconnected, drive the vehicle at 25 km/h {15.5 mph} or more and
display the tire pressure PID after the data transmission.
End Of Sie
ON-BOARD DIAGNOSTIC SYSTEM ACTIVE COMMAND MODES FUNCTION (TIRE PRESSURE MONITORING
SYSTEM)
! The active command modes function is used for executing the wheel unit ID registration
Command name
IDR_MODE
End Of Sie
ON-BOARD DIAGNOSTIC SYSTEM FREEZE FRAME DATA MONITOR FUNCTION (TIRE PRESSURE
MONITORING SYSTEM)
! The Freeze Frame Data monitor items are shown below.
ON-BOARD DIAGNOSTIC
Description (Input/output part)
Registered wheel unit ID (Wheel unit 2)
Registered wheel unit ID (Wheel unit 3)
Registered wheel unit ID (Wheel unit 4)
Vehicle speed
Battery positive voltage
Tire pressure (wheel unit 1)
Tire pressure (wheel unit 2)
Tire pressure (wheel unit 3)
Tire pressure (wheel unit 4)
Tire temperature (wheel unit 1)
Tire temperature (wheel unit 2)
Tire temperature (wheel unit 3)
Tire temperature (wheel unit 4)
Description
Wheel unit ID registration
Operation/unit
(Mazda Modular Diagnostic
System (M-MDS))
–
–
–
KPH, MPH
V
Pa, psi
Pa, psi
Pa, psi
Pa, psi
$C, $F
$C, $F
$C, $F
$C, $F
id020200100400
Operation
Operation
condition
Ignition switch at
Off/On
ON
id020200100500
02-02–5
02-02