Accepting A Bluetooth Partnership - HTC Sprint Touch Pro2 Manual

The connected Bluetooth device now appears in the
Tip Tap Properties to change the paired device name. Tap Menu > Update to update the list of
services that you can use with the paired device.
Creating a Bluetooth partnership between two devices is a one-time process. Once a
partnership is created, the devices can recognize the partnership and exchange information
without entering a passcode again.

Accepting a Bluetooth Partnership

1. Ensure that Bluetooth is turned on and in visible mode.
2. When prompted, enter or accept the passcode (the same passcode from the device
requesting the partnership) to establish a secure connection.
3. Tap . The paired device now appears in the
OK
exchange information with the paired device.
Tip To delete a Bluetooth partnership, select the device's name on the Devices tab, and then tap
Menu > Delete . When prompted to confirm, tap Yes .
Connecting a Bluetooth Hands-free or Stereo Headset
For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a
car kit with your device. Your device also supports A2DP (Advanced Audio Distribution
Profile) which allows you to use a Bluetooth stereo headset for hands-free phone
conversations and for listening to stereo music.
To connect a Bluetooth hands-free or stereo headset:
1. Make sure that both your device and the Bluetooth headset are turned on and within
range, and that the headset is visible. Refer to the manufacturer's documentation to find
out how to set the headset in visible mode.
2. Tap
Start > Settings > Communications
104 2G. Bluetooth
Devices
tab (
Devices
and then tap
Bluetooth
tab ( ).
). You can now
.