Bluetooth Partnerships; Creating A Bluetooth Partnership - HTC Sprint Touch Pro2 Manual

To easily switch Bluetooth off or back on, tap
Comm Manager and then tap Bluetooth's OFF/ON slider. Your device remembers whether
visible mode was previously enabled or disabled. If you did not disable visible mode,
switching Bluetooth on in the Comm Manager also puts your device in visible mode
automatically. For more information about using the Comm Manager, see "Comm Manager"
on page 97.

Bluetooth Partnerships

A Bluetooth partnership is a relationship that you create between your device and another
Bluetooth-enabled device in order to exchange information in a secure manner.

Creating a Bluetooth Partnership

1. Tap
Start > Settings > Communications
2. On the Settings tab (
3. Tap a Bluetooth device to connect with.
4. Specify a passcode, which can be 1 up to 16 characters, to establish a secure
connection, and then tap
Note Your device uses Bluetooth 2. 1 with Secure Simple Pairing feature. If the other Bluetooth
device you are pairing with also supports the same feature, the passcode will be
automatically created and displayed on both devices. Both you and other party simply need
to verify that the passcode is the same and tap Yes to establish the partnership.
5. After the receiving party accepts the partnership, the Bluetooth device name is shown
on the screen, including all Bluetooth services that you can use with it. Select the check
boxes of the Bluetooth services you want to use, and then tap
6. If you selected to use the Bluetooth Serial Port service of the paired device, select a local
serial port to assign for the paired device, and then tap
Start > Settings > Communications
and then tap
), tap Add a device .
.
OK
.
Bluetooth
Done .
.
Continue
2G. Bluetooth
to open the
103