HTC Sprint Touch Pro2 Manual page 10

2. Install the battery by following these steps:
Align the battery's exposed copper contacts with the battery connectors inside the
battery compartment.
Insert the contact's side of the battery first and then gently push the battery into place.
3. Replace the back cover, and insert the stylus back into the stylus compartment.
Turning the Device On for the First Time
1. Press the
Power
2. When you turn on your device for the first time, your device starts up and guides you to
calibrate the touch screen. Follow the onscreen instructions to complete the screen
calibration process.
3. Your device will then be activated.
If your device's phone is already activated, it will search for Sprint service and then
enter standby mode.
If your device's phone is not yet activated, see "Activating Your Device" on page 5 for
more information.
Note Your device's battery should have enough charge for your device to turn on and find a signal, set
up your voicemail, and make a call. You should fully charge your battery as soon as possible. See
"Charging the Battery" on page 19 for details.
4 1A. Setting Up Service
button.