Programming Using The Web User Interface - Panasonic KX-UDS124 Installation Manual

4 Deployment Procedure
Specifying a Terminal Type for S-PSs, SIP-CSs and the Super Master CS
1. Click Setup ® PBX Configuration ® Configuration ® Slot.
2. Click Virtual ® V-UTEXT32.
3.
Move the mouse pointer over the V-UTEXT32 card (Virtual UT Extension Card).
A menu will be shown under the mouse pointer.
4.
Click Port Property.
5.
Select SIP-CS for SIP-CSs and S-PS for S-PSs in the Telephone Type column.
Note
Make sure that the port for the SIP-CS or S-PS is in OUS status when changing Telephone Type.
6.
Click OK.
7.
Move the mouse pointer over the installed V-UTEXT32 card to display the menu of options, and click Ins
(In service) to set the card back to in service.
A configuration file for the system is created.
Note
If you perform one of the following, the configuration file will be re-created.
•
Changing the V-UTEXT32 card status from "OUS" to "INS"
•
Restarting the KX-NS1000.
•
Changing the following settings:
–
Extension number
–
Extension name
–
Flexible button

4.9.2 Programming using the Web User Interface

The following items must be programmed using the Web user interface.
•
KX-NS1000 URL for downloading configuration file
•
Registering S-PSs to the Super Master CS
For details about Web user interface operation, refer to "Web User Interface Programming" in the
Administration Guide.
56 Installation Guide