Acura TSX 2005 User Manual page 232

Main Menu
Changing a Flat Tire
3. Open the trunk. Raise the trunk
floor by lifting up on the back edge.
4. Take the tool tray out of the trunk,
and remove the tools and the jack.
238
Table of Contents
5. Unscrew the wing bolt and take
the spare tire out of the trunk.
6. Loosen each wheel nut 1/2 turn
with the wheel wrench.
TOOL TRAY
JACKING POINT
7. Place the jack under the jacking
point nearest the tire you need to
change. Turn the end bracket
clockwise until the top of the jack
contacts the jacking point. Make
sure the jacking point tab is
resting in the jack notch.