Acura TSX 2005 User Manual page 103

Main Menu
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
Without Navigation System
Select .
1.
When you select
automatically switches to the
Fresh Air mode.
2. Set the fan to the desired speed.
3. Adjust the warmth of the air with
the temperature control bars (
or side).
With Navigation System
1. Press the A/C button, the manual
operation of A/C screen will
appear.
2. Select the desired mode and fan
speed icons on the display.
3. Adjust for warmth with the
temperature control bars (
side).
Table of Contents
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
61 ). If it moves near the red zone,
turn off the A/C until the gauge
reads normally.
Without navigation system
, the system 1. Turn on the A/C by pressing the
A/C button.
2. Make sure the temperature
control is set to maximum cool.
3. Select
4. If the outside air is humid, select
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
5. Set the fan to the desired speed.
or
With Navigation System
1.
2.
3.
If the interior is very warm,
cool it down more rapidly by partially
opening the windows, turning on the
. A/C, and setting the fan to
maximum speed in Fresh Air mode.
Vents, Heating, and A/C
Press the A/C button, the Manual
Operation A/C screen will appear.
Select the ON icon on the display.
Select the desired temperature
and MODE selections. If the
outside air is humid, select the
Recirculation mode. If the outside
air is dry, select Fresh Air mode.
you can
105