Placing Thin Paper (Thin Paper Mode) - Canon imageFORMULA DR-M160II User Manual

Placing Thin Paper (Thin Paper Mode)

When placing a document with thin paper, switch the mode of the
scanner to thin paper mode. In thin paper mode, the placed document
is fed in a manner that prevents it from being damaged.
Thin paper mode switching is performed by opening the scanner
driver settings screen.
1
Sets the scanning conditions.
2
Place the document as described in the
multiple documents" procedure
Hint
• When scanning multiple page documents that are fastened
together, such as invoices, select the [Non Separation Feeding
Mode] check box in step 4. Also, it is recommended to place
the documents in the scanner one at a time with the edge that
is fastened together facing down.
• When scanning multiple documents of different sizes, the
scanned documents may not be ejected neatly onto the
document eject tray. When scanning such documents, open
the eject tray support.
"Scanning
on p. 25.
28
1
Opens the scanner driver's Detail Settings screen.
p. 57)
2
Open the [Feeding] tab.
3
Select the [Thin Paper Mode] check box.
4
Click the [OK] button to close the settings screen.
1
Opens the scanner driver's Detail Settings screen.
p. 47)
2
Click the [More] button.
The scanner driver's Detail Settings screen opens.
(See
(See