Canon imageFORMULA DR-M160II User Manual page 35

1
Opens the scanner driver's Detail Settings screen.
p. 47)
2
Select the [Double Feed Detection] check box, and then
select any one of [Detect by Ultrasonic], [Detect by
Length], and [Detect by Ultrasonic and Length].
3
Click the [More] button when the Double Feed Detection
Ignore function is also used.
The scanner driver's Detail Settings screen opens.
4
Select the [Rapid recovery system] check box.
5
Click to close the dialog box.
What to do when a double feed is
detected
(See
When not using the double feed detection ignore function
If a document double feed is detected during scanning, document
feeding stops when the double fed documents are ejected. When this
happens, the following error code is displayed in the Job No. Indicator
of the operating panel.
Double feed detection error code
Also, a message screen is displayed to notify you that a double feed
has been detected.
When this happens, stop the scanning in the application and then
scan the documents again.
35