Tomberlin Anvil Operator's Manual page 20

items to be carried
out by qualified
mechanic
Scheduled oiling/ lubrication procedures for electric vehicle
Schedule interval
quarterly inspection
items by owner or
qualified mechanic
Annual inspection
items to be carried
out by qualified
mechanic only
CHECKING HYDRAULIC BRAKE FLUID LEVELS
To check the brake fluid level remove the reservoir cap located on the right hand side of the
dash.
How to check brake fluid level
There is a magnetic switch in the reservoir which is connected directly to an indicator light
on the screen of the Instrument Cluster. If the level of the fluid is lower than the standard that
the buoy in the reservoir requires, the indicator light will turn on. You should also periodically
check the fluid manually by removing the cap and visually inspecting as per the next section
on how to add brake fluid.
Anvil Operator's Manual
Motor
Front wheel bearing
Driving axle
Entire car
Check all of the above routine / weekly / monthly/ quarterly/ semi-annual inspection items
Inspection
Brake pedal
Parking brake
Shaft, accelerator pedal
Reservoir
Front suspension
Check the rear axle and fill
Check the front-wheel bearing
Check the motor brushes, and replace if necessary
Adjust and re-pack bearing if required
Check the driving axle and fill
lubricate entire vehicle as per diagram
Position Recommended lubricating oil
1 General-purpose lithium base grease
2 General-purpose lithium base grease
3 General-purpose lithium base grease
7 Shell Brake fluid
4 General-purpose lithium base grease
6 Great Wall gear oil 85W/90 GL-5
5 General-purpose lithium base grease
Page 19