Hyundai 2004 Santa Fe Owner's Manual page 101

B970C02L-GAT
Automatic Operation
B970C01O
The FATC (Full Automatic Temperature Con-
trol) system automatically controls the heating
and cooling by doing as follows:
1. Push the "AUTO" switch. The indicator light
will come on confirming that the Face, Floor
and/or Bi-Level modes as well as the blower
speed and, air conditioner will be controlled
automatically.
smhma-1b.p65 89
B970C03O
2. Push the "TEMP" button to set the desired
temperature.
The temperature will increase to the maxi-
mum 90°F(32°C) by pushing on the bu-
tton. Each push of the button will cause the
temperature to increase by 1°F(0.5°C).
The temperature will decrease to the mini-
mum 62°F(17°C) by pushing on the bu-
tton. Each push of the button will cause the
temperature to decrease by 1°F(0.5°C).
9/19/03, 9:09 AM
FEATURES OF YOUR HYUNDAI
NOTE:
If the battery has been discharged or dis-
connected, the temperature mode will reset
to Centigrade degree.
This is a normal condition and you can
adjust the temperature mode from Centi-
grade to Fahrenheit as follows;
Press the TEMP down ( ) button 3 seconds
or more with the AMB button held down.
The display shows that the unit of tempera-
ture is adjusted to Centigrade or Fahrenheit
(°C → → → → → °F or °F → → → → → °C).
Photo sensor
HSM502
NOTE:
Never place things on the sensor which is
located in the car on the instrument panel
to ensure better control of the heating and
cooling system.
1
89