Replacing Backup Bulbs - Ford 2005 05+ Mustang Owner's Manual

Lights
6. Pull the bulb straight from the
socket.
Install the new bulb in reverse
order.

Replacing backup bulbs

The backup lamp is located in the tail lamp assembly. Follow the same
steps to replace either bulb.
1. Make sure headlamp switch is in
OFF position, then open the trunk.
2. Carefully remove fasteners
around the lamp area, then remove
the interior trunk trim.
3. Disconnect the electrical
connector by pulling it straight off
of the lamp assembly.
4. Remove the three nut and washer
assemblies and the lamp assembly
from the vehicle.
5. Remove the bulb socket by rotating it counterclockwise, then pulling it
out of the lamp assembly.
6. Pull the bulb straight from the
socket.
Install the new bulb in reverse
order.
39
2005 05+ Mustang (197)
Owners Guide (post-2002-fmt)
USA (fus)