Sending A Status Call - Motorola APX 7000 User Manual

3 U D
or to Preset for the preset preprogrammed talkgroup.
OR
U D
or to the required talkgroup.
OR
Use the keypad to enter the number of the corresponding
talkgroup in the list.
4
Press the Menu Select button directly below Sel to save the
currently selected talkgroup and return to the Home screen.
5
If the encryption key associated to the new talkgroup is
erased, a momentary key fail tone sounds and the display
shows Key fail.
OR
If the encryption key that is associated to the new talkgroup
is not allowed, a momentary key fail tone sounds and the
display shows Illegal key.
6 H
Press or the PTT button to exit.
OR
Turn the 16-Position Select knob to exit.
44
English

Sending a Status Call

This feature allows you to send data calls to the dispatcher
about a predefined status.
Each status can have up to a 14-character name. A maximum
of eight status conditions is possible.
Note: The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle
and the timer expires. You will hear the Menu Inactive
Exit Tone upon feature exit.
Procedure:
Press the preprogrammed Status button and proceed to
Step 3.
OR
Follow the procedure below.
1 < >
or to Sts.
2
Press the Menu Select button directly below Sts.
3
The display shows the last acknowledged status call, or the
first status in the list.
4 U D
or to the required status.
OR
Use the keypad to enter a number corresponding to the
location in the status list.
5
Press the PTT button to send the status.