Ford MyFord Touch Supplement Manual page 14

Voice recognition system overview
2. Select from the following:
• Interaction Mode
• Media Candidate Lists
• Voice Control Volume
Or
1. Press on the steering wheel controls. A tone will sound followed
by the prompt, "Please say a command". Another tone will sound to
signify the system is listening.
2. Say one of the following commands:
• Interation Mode Advanced
• Confirmation Prompts On
• Phone Candidate Lists On
• Media Candidate Lists On
Interaction Mode: Standard interaction mode provides more detailed
interaction and guidance while the advanced mode has less audible
interaction and more tone prompts.
Confirmation Prompts: Confirmation prompts are short questions
asked by the system when the system has not clearly heard or
understood your request. Note: Even with confirmation prompts turned
off, you may be asked to confirm settings occasionally and number
inputs.
Phone/Media Candidate Lists: Candidate lists are a list of possible
results from your voice commands. These occur when SYNC has equal
confidence of several possible results from your voice command.
How to use voice commands with your system
1. Press on the steering wheel controls.
Depending on the feedback setting, you will either hear, "Please say a
command" followed by a tone or just the tone, signaling the system is
ready to accept your command.
2. After the tone, speak the command clearly.
For best voice recognition performance
• Ensure that the interior of the vehicle is as quiet as possible.
• Speak naturally without long pauses between words.
• After pressing
, wait for the tone to sound and for 'Listening' to
appear in the display. Any command spoken prior to this will not
register with the system.
See End User License Agreement at the end of this book
2011 HMI-2 Gen 2 (ln1)
Supplement, 1st Printing
USA (fus)
• Confirmation Prompts
• Phone Candidate Lists
• Interation Mode Standard
•Confirmation Prompts Off
• Phone Candidate Lists Off
• Media Candidate Lists Off
13