Ford MyFord Touch Supplement Manual page 56

• Enable Valet Mode
• Edit Door Keypad code
Ambient lighting (if equipped)
When activated, ambient lighting will illuminate footwells and cupholders
with a choice of colors. To access:
1. Press Menu > Vehicle > Ambient lighting.
2. Touch the desired color.
3. Use the scroll bar to increase/decrease the intensity.
To turn the feature on/off, simply press the power button (
Rearview camera (if equipped)
The rear-view camera provides a video image of the area behind the
vehicle.
1. Press Menu > Vehicle > Reverse camera.
2. Select from the following settings:
• Rear camera delay
• Guideline
Valet mode
Valet mode allows you to lock the system so that none of your
information on the system can be accessed until it is unlocked with the
correct PIN.
1. Press Menu > Vehicle > Valet mode.
2. Select 'Enable valet mode'.
3. When prompted, enter a four digit PIN.
Note: After you press to 'Continue' the system will be locked until the
correct PIN is entered again.
Note: If you are locked out and need to reset the PIN, you can enter
3681 and the system will unlock.
Changing your door keypad code
To change the keypad code for your keyless entry keypad system:
1. Press Menu > Vehicle > Edit door keypad code.
2. Enter your current keypad code and, when prompted, enter the new
code you would like.
See End User License Agreement at the end of this book
2011 HMI-2 Gen 2 (ln1)
Supplement, 1st Printing
USA (fus)
Settings
• Visual park aid alert
).
55