Ford MyFord Touch Supplement Manual page 43

Phone features
Receiving an incoming text message
When there is an incoming text message, an audible tone will sound and
the screen will display a pop-up with the caller name and ID if supported
by your phone.
• Press 'View' to view the text
message.
• Press 'Listen' for SYNC to read
the message to you aloud.
• Press 'Reply' to send a reply text
message.
• Press 'Dial' to call the contact.
• Press 'Ignore" to exit the screen.
Note: If you press 'View' and your vehicle is traveling over 5 mph
(8 km/h), the system will instead offer to read the message to you.
PHONE SETTINGS
To access phone settings:
1. Press Phone > Settings. (You can also press Menu > Settings >
Phone).
2. Select from the following settings:
• Bluetooth Devices: Select to connect, disconnect, add or delete a
device, as well as save it as a favorite.
• Bluetooth on/off: Select to turn Bluetooth on or off.
• Do not disturb: Select to have all calls go directly to your voice mail
and not ring in the vehicle cabin.
• 911 Assist: Select to turn 911 Assist™ on/off. Refer to 911 Assist™
in the SYNC Services and Apps chapter in this supplement for
complete information on this feature.
• Phone ringer: Allows you to select what you would like to hear when
you receive a call. Choose from possible system ring tones, your
currently paired phone's ring tone, a beep, text to speech or if you
would like the notification to be silent.
• Text message notification: Allows you to select how you would like
to be notified when you receive a text message (if supported by your
phone). Select from possible system alert tones, text to speech or
silent.
42
See End User License Agreement at the end of this book
2011 HMI-2 Gen 2 (ln1)
Supplement, 1st Printing
USA (fus)