Advertisement
,167$//$7,21#)#6(783
&RPSRVLWH#9LGHR
DQG#609LGHR#,QSXW
5047
9LVWD
#43.#8VHU*V#0DQXDO
*5$3+;
To control audio levels in an audio/visual system, connect pre-amplified (line
level) audio inputs to the left and right channel audio inputs on the Input 1 panel.
Then connect the audio outputs to external audio amplification equipment for
sound output. All audio connection cables require standard RCA type phono
plugs.
ö
The Composite/S-Video input provides simultaneous connection of both a
composite video source (Input 3) and an S-Video source (Input 4).
If connecting a S-Video source, use the 4-pin mini DIN connector or the Y and C
BNC connectors (luminance and chrominance) — do not use both as input. If
connecting a composite video source, use the Composite BNC connector or the
RCA phono jack — do not use both as input. See Figure 2-14.
NOTE: If using the loop-through feature for composite or S-Video input, see
"Video Termination" in 3.7, Adjusting and Checking System Parameters.
)LJXUH#50461#5*%#,QSXWV
Advertisement
