Braking - Honda RC51 2006 Owner's Manual

05/11/15 12:18:12 31MCF660_058
Your motorcycle is equipped with disc
braking systems which are hydraulically
activated. Depressing the brake pedal
applies the rear disc brake. Operating the
brake lever applies the two front disc
brakes.
As a general rule, the front braking system
provides about 70 percent of total stopping
power.
For full braking effectiveness, use both
the pedal and lever simultaneously.
Using both braking systems will stop
your motorcycle faster with greater
stability.

Braking

To slow or stop, apply the brake lever and
brake pedal smoothly, while downshifting
to match your speed.
Gradually increase braking as you feel the
brakes slowing your speed. The increase
in engine compression from downshifting
will help slow your motorcycle.
To prevent stalling the engine, pull the
clutch lever in before coming to a
complete stop. For support, put your left
foot down first, then your right foot when
you are through using the brake pedal.
Applying the brakes too hard may cause
the wheels to lock and slide, reducing
control of your motorcycle. If this happens,
release the brake controls, steer straight
ahead until you regain control, then
reapply the brakes more gently.
Basic Operation & Riding
49