Setting Dialling Method - Toshiba TF 461 Instruction Manual

Installation

Setting dialling method

There are two dialling methods. The
pulse-dialling method is normally used in
the public switched telephone network. If
your fax machine is connected to a PABX,
the DTMF dialling method may also be
used. As the public network is
modernised, this dialling method may also
be used in the public network. If you are
in any doubt, first try the pulse-dialling
method (basic setting). If the dialling
procedure fails, try DTMP dialling. How
ever DTMF is the most efficient.
TOSHIBA
TF 461
2 x
Standby mode
Start the menu
Confirm with START (2x)
Make your selection
Enter function number
Confirm with START
Set dial method
Page through the menu...
...until you reach the desired menu item
Confirm with START
Press STOP, return to standby
mode
11
Installation
GB