Install The Motherboard; Cpu Installation - SOYO SY-7VBA 133 Quick Start Manual

Install the Motherboard

To perform the installation of your new SY-7VBA 133 Motherboard, follow the steps below:

CPU Installation

Step 1.
Mark your CPU Frequency: Record the working frequency of your CPU that
should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0) 466MHz (66 x7.0)
433MHz (66 x 6.5) 500MHz (66 x7.5)
FSB 100MHz
500MHz (100 x 5.0)
550MHz (100 x 5.5)
FSB 133MHz
533MHz (133 x 4.0)
600MHz (133 x 4.5)
CPU Mount Procedure:
have purchased separately, follow these instructions.
1
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
SY-7VBA 133 Quick Start Guide
533MHz (66 x 8.0)
566MHz (66 x 8.5)
600MHz (100 x 6.0) 700MHz (100 x 7.0)
650MHz (100 x 6.5)
667MHz (133 x 5.0) 800MHz (133 x 6.0)
733MHz (133 x 5.5) 866MHz (133 x 6.5)
To mount the Pentium® & Celeron
3
7
600MHz (66 x 9.0)
633MHz (66 x 9.5)
800MHz (100 x 8.0)
750MHz (100 x7.5) 850MHz (100 x 8.5)
933MHz (133 x 7.0)
TM
processor that you
2
4
667MHz (66 x 10.0)
700MHz (66 x 10.5)