Quick Bios Setup - SOYO SY-7VBA 133 Quick Start Manual

SY-7VBA 133 Quick Start Guide
3
3

Quick BIOS Setup

This Motherboard does not use any hardware jumpers to set the CPU frequency. Instead,
CPU settings are software configurable with the BIOS [SOYO COMBO SETUP]. The
[SOYO COMBO SETUP] combines the main parameters that you need to configure, all in
one menu, for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then press the <DEL> key
during the system diagnostic checks to enter the Award BIOS Setup program. The CMOS
SETUP UTILITY will display on screen. Then, follow these steps to configure the CPU settings.
Select [STANDARD CMOS SETUP]
Step 1.
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to "Auto".
Select [LOAD SETUP DEFAULT]
Step 2.
Select the "LOAD SETUP DEFAULT" menu and type "Y" at the prompt to load the BIOS
optimal setup.
Select [SOYO COMBO SETUP]
Step 3.
Move the cursor to the [CPU Frequency] field to set the CPU frequency.
The following table shows all available [CPU Frequency] settings on your SY-7VBA 133
Motherboard . If you set this field to [Manual], you will be required to fill in the next two
consecutive fields: (1) the CPU Host/PCI Clock, and (2) the CPU Ratio.
CPU Frequency (MHz)
Manual
400MHz (66 x 6.0)
433MHz (66 x 6.5)
466MHz (66 x 7.0)
500MHz (66 x 7.5)
533MHz (66 x 8.0)
566MHz (66 x 8.5)
600MHz (66 x 9.0)
633MHz (66 x 9.5)
Select the working frequency of your Pentium
Note: Mark the checkbox that corresponds to the working frequency of your Pentium
processor in case the CMOS configuration should be lost.
Select [SAVE & EXIT SETUP]
Step 4.
Press <Enter> to save the new configuration to the CMOS memory, and continue with the
boot sequence.
667MHz (66 x 10.0)
700MHz (66 x 10.5)
500MHz (100 x 5.0)
550MHz (100 x 5.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
700MHz (100 x 7.0)
750MHz (100 x 7.5)
800MHz (100 x 8.0)
850MHz (100 x 8.5)
III, Celeron processor among these preset values.
®
12
600MHz (133 x 4.5)
666MHz (133 x 5.0)
733MHz (133 x 5.5)
800MHz (133 x 6.0)
866MHz (133 x 6.5)
933MHz (133 x 7.0)
1000MHz (133 x 7.5)
1.13GHz (133 x 8.5)
III, Celeron
®