Memory Configuration Table - SOYO SY-7VBA 133 Quick Start Manual

Configure Memory
Step 3.
Your board comes with three DIMM sockets, providing support for up to 1.5GB of main
memory using unbuffered and registered DIMM modules from 8MB to 512MB. On this
motherboard, DRAM speed can be set independent from the CPU front side bus speed.
Depending on the DRAM clock speed setting in the BIOS setup, appropriate memory
modules must be used. For 66MHz DRAM speed, use PC66 memory; for 100MHz DRAM
speed, use PC100 memory; for 133MHz DRAM speed, use PC133 memory.

Memory Configuration Table

Number of
Memory Modules
RAM Type
Memory Module
Size (MB)
CPU Core Voltage Adjust (VJ1)
Step 4.
In case your CPU is running on a frequency higher then it is specified for, increasing its core
voltage can enhance its stability. Over-clocking your CPU does however force your system
to operate outside of its specifications, and therefore SOYO can not guarantee system
stability.
CPU Core Voltage Adjust
Default Vcore
3% higher
6% higher
10% higher
SY-7VBA 133 Quick Start Guide
DIMM 1 DIMM 2
EDO/ SDRAM/ VCM SDRAM
8/16/32/64/128/256/512 MB
VJ1 Setting
Short pin 1-2
Short pin 2-3
Short pin 4-5
Short pin 5-6
9
DIMM 3
4 5 6
1 2 3
4 5 6
1 2 3
4 5 6
1 2 3
4 5 6
1 2 3