The Ge100 Blood Glucose Meter - GE GE100 User Manual

Caution
- Before using the GE100 Blood Glucose Monitoring System to test your blood glucose, please read all the
instructions and conduct all the tests including the quality control test (Refer to page 36.)
- Please do the quality control test regularly to make sure the test results are accurate.
- The GE100 Blood Glucose Meter can only be used with the
brand strips should not be used under any circumstances. The use of other brands of strips may give
inaccurate results.
- The GE100 Blood Glucose Monitoring System is intended for in vitro diagnostic use only. The testing
result is calibrated to be plasma equivalent to testing with fresh capillary whole blood samples from the
fingertip, palm and forearm.
- The GE100 Blood Glucose Monitoring System is intended for self-testing and professional use. It should
not be used to diagnose diabetes mellitus.
- GE100 Blood Glucose Monitoring System has not been validated for use on neonates. Therefore, it's not
intended for use on neonates.
- GE100 Blood Glucose Monitoring System has not been used for arterial blood testing yet, so it is not
suitable to be used for arterial blood testing.
- If the GE100 Blood Glucose Meter and Test Strips are exposed to a substantial change in temperature,
please wait 30 minutes before measurement.
- Follow all environmental protection regulations when disposing of batteries.
- Do not perform a blood glucose test when USB cable is connected to the Blood Glucose Meter.
4
GE100 Blood Glucose Test Strips. Other
- Avoid contact with dripping or splashing liquids.
- The minimum blood sample size to test using the
1.0µL 1.5µL
Sample Size Example
A minimum of 1.0µL of blood is needed for testing with the
Blood sample size above 3.0µL might contaminate the test strip port and the meter.
Blood sample size below 1.0µL might cause inaccurate test result or might not start the meter. In this
case, repeat the test with a new test strip.
CAUTION
- The GE100 Blood Glucose Meter will be set to mg/dL by default when sold in the United States.
When your display shows " mmol/L " during setting or test, please contact customer service.
Use of the wrong unit of measure may cause incorrect treatment.
Precaution
GE100 Blood Glucose Monitoring System is 1.0µL.
2.0µL 3.0µL 4.0µL
GE100 Blood Glucose Monitoring System.
5