Motorola MOTORAZR2 V8 Service Manual page 57

Level 1 and 2 Service Manual
6809515A95-O
13. Place the housing sleeve to the front housing assembly. Ensure there is no
damage to the K-flex. Press the housing sleeve into place in the front housing.
Figure 48. Installing the Housing Sleeve
14. Inspect the assembly before proceeding to the next step.
15. Insert the front housing assembly into the keypad flex press fixture.
16. After using the press, remove the front housing assembly from the press fixture
and inspect for damage or dents.
Assemble the Camera Gasket and Water Label
1. Peel the liner from the camera gasket and place the camera gasket into the
fixture with the adhesive side facing upwards.
2. Place the flip outer assembly. Use the fixture to correctly align the outer
assembly.
July 18, 2007
Disassembly
v462530
57