Motorola MOTORAZR2 V8 Service Manual page 28

Disassembly
28
11. Align the housing latches with the corresponding openings on the front
housing. Gently press the housings together until the catches snap into place.
Figure 8. Rear Housing Latches
12. Replace the 2 housing screws and tighten to a final torque setting of 1.0 inch
pounds. Do not over tighten.
13. Replace the 2 housing screws below the keypad.
14. Replace the bumper pad.
15. Replace the USB grommet.
16. Replace the memory card, battery, and battery cover as described in the
procedures.
July 18, 2007
V8
v462224
6809515A95-O