Motorola MOTORAZR2 V8 Service Manual page 43

Level 1 and 2 Service Manual
6809515A95-O
12. Remove the BRC from the tray and remove the adhesive liner on the top side.
13. Bend the BRC legs inward slightly and install into the flip front assembly (see
Figure 29).
BRC leg
Figure 29. Installing the Battery Retention Chassis
14. Insert the end of the BRC into the slot between the screw boss and the wall of
the front housing (see Figure 30).
Figure 30. Installing the Battery Retention Chassis
15. Install the transceiver board assembly, rear housing assembly, SIM, battery,
and battery cover, as described in the procedures.
July 18, 2007
Front housing
Screw boss
Disassembly
BRC leg
V462430
V462432
43