Roland Stika Plus STX-8 User Manual page 12

When the screen at right appears, click [Dr.STIKA PLUS]-
3
[Install].
The Dr.STIKA PLUS setup screen appears. Follow the on-
4
screen messages to complete the installation.
When installation is completed, remove the CD-ROM from
the CD-ROM drive.
Installing the DRIVER
Installing the driver for Windows 95/98
If you're using Windows 95 or Windows 98, follow the steps below to install the driver.
The screens shown in these steps are for Windows 95. These screens may differ in places from the screens for Windows 98, but the steps
themselves are identical.
Place the CD from the Roland Software Package in the CD-
1
ROM drive.
Click [Start]. Click [Settings], then click [Printers].
2
Double-click on the [Add Printer] icon.
3
10
Click this button.