Error Codes; T Roubleshooting And E Rror C Odes; Troubleshooting Hints - Franke Evolution Plus Operating Instructions Manual

Troubleshooting and Error Codes
If a problem occurs, your Evolution Plus will give you an error code.
Error codes are displayed on the display screen. Troubleshooting hints are listed below.
Please feel free to contact our service department in case of any questions.

Troubleshooting Hints

Error code Text on display screen
1 External RAM
2 Dispenser missing
3 Door open
5 External RAM
10 to 13 Temperature sensor
14 to 17 Temperature sensor
18 to 21 Temperature sensor
22, 23 Heater timeout
30 to 32 Water boiler
40 to 44 Motor timeout
50 to 58 Chipcard ident
90 Maintenance due
100 Grounds container full
105 Fresh/Waste water
110 Flow meter
120 No beans
130 No milk
140 Communication
150 Empty grnd. cont.
302, 303 -No Display-
304 to 307 -No Display-
Solution
Contact customer service.
Attach dispenser and check that it is properly seated.
Close grounds door.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service.
Contact customer service and schedule maintenance
Empty grounds container
Only for models with water tanks: Empty or fi ll tank.
Turn machine off and back on again. Contact customer service.
Add coffee beans.
Add milk.
Only with connected billing device. Turn machine and billing off and back on again. Contact customer service.
Empty grounds container
Contact customer service.
Contact customer service.