Support Contact Information - X-Digital System X-Digital Systems XDS Quick Start Manual

Review Relay Mappings
You will see the default relay mapping configuration for your receiver. Please modify
and verify your mappings as desired.
Approve Setup and Activate
Once you reviewed all your desired settings, check the APPROVE SETUP AND
ACTIVATE box, press the UPDATE button, and the NOC will send the updated
programming to your receiver.
It may take a couple of minutes for the XDS receiver to download the Westwood One
programming information. To verify your receiver is activated, the UPDATE LED will
turn off and the front panel LCD will display the "XDSPRO" message instead of the
"Please Activate" message

3. SUPPORT CONTACT INFORMATION

If you have any problems please call Westwood One Technical Services and they will
help you set up and verify your receiver.
The Westwood One Technical Services office is staffed Monday to Friday from
9:00 AM to 6:00 PM ET for technical assistance.
Westwood One | Technical Services
100 Manhattanville Road, Suite 11
Purchase, N.Y. 10577
Phone : (914) 908-3210
Fax : (914) 305-9846
E-MAIL: techservices@westwoodone.com
Revision J 9/30/2014 R830000-1060 Quick Start Guide, XDSPRO Receiver
Page 9 of 11