Table of Contents
Advertisement
3. Review Schedule: In the XDS system each program, not each channel, is permissioned
and labeled for station use. Therefore, instead of tuning to a channel to find a program,
you will schedule the programs to appear on each output port based on the stations
that have received authorization(s). You will need to review your schedule before
activating your receiver. For detailed instructions on using the scheduler, please see
the PRO4P User's Guide.
Note: This receiver is equipped with digital storage that allows a 'tape delay' of live
network programming per your affiliate agreement. You can use this capability to
schedule your receiver with a combination of live and delayed programming. The User's
Guide contains a full explanation of the scheduler
4. Review Relay Mappings: The receiver will be preconfigured by the network with the
default relay mappings. Please review and modify as desired to connect the receiver
with your automation equipment.
5. Approve Setup and Activate: Once you have reviewed all of the settings above, press
the Update button. Within a few minutes, the NOC will send the updated programming
to your receiver and the Update LED on the front panel will turn off.
6 Support Contact Information
If you have any problems with the steps in this guide, please call the Technical Services contact
specified in the Network Configuration Data Sheet. The support staff will be able to assist you in
setup and verification.
7 Full User's Guide
This Quick Start Guide is not a full equipment manual. To download the XDS PRO4P User's Guide,
please see the Help tab of the Affiliate website where all documents related to receiver operation
can be found. Please note that the User's Guide may periodically change to reflect changes in
software features.
8 USB Port
The Front Panel USB port is not implemented at this time. Please DO NOT plug in any device at this
time.
1327 R830002-1062
Rev A
XDS PRO4P Quick Start Guide
Page 8 of 11
5/6/2010
Advertisement
Table of Contents
Need help?
Do you have a question about the XDS PRO04P and is the answer not in the manual?
Questions and answers