Carbonation Troubleshooting Flow Chart #2 - ICI TOPPER Installation And Service Manual

CARBONATION TROUBLE SHOOTING FLOW CHART #2
Check CO2 supply
C02 cylinder is empty
Change C02 cylinder
Hi pressure regulator
is set to low or
malfunctioning
Adjust CO2 pressure
at a minimum of 25 PSI
above water pressure
MOTOR/PUMP
DOES NOT COME ON
Non-carbonated water &
syrup being dispensed
only
Water pressure greater than
or close to CO2 pressure will
stop the carbonation process
6-7
Check water pressure
-
Install or adjust water
regulator