This screen allows you to set the actions the operator can take, what
relays will be activated and what cameras are associated with other
cameras.
• Action :
There are three possible settings. Timed: The alarm will
"time out" at the designated time (Hold Time) unless the operator
clears it earlier. Latched: The alarm remains active until the operator
acknowledges it. Trans (Transparent): The alarms are not latched and
cannot be cleared by the operator.
• Relay :
There are four possible relay settings. 1 or 2: Sets either
internal relay 1 or 2 to be activated by an alarm. 1&2: Sets both
internal relays 1 and 2 to be activated by an alarm. Off: Neither
internal relay will be activated by an alarm.
• Associated :
This button allows you to associate other cameras with
a camera that is in an alarm condition. Selecting this item will take
you to the Associated Camera Setup submenu.
• < Back :
This takes you to the Alarm Action Setup (1) submenu.
• Exit :
Saves your changes and returns to the Main Menu.
21