Table of Contents
Advertisement
To access the Main Menu of the setup screens, move the cursor to the
top of the screen. The top menu bar appears. Select Setup.
< Figure 6 > Supervisor Password screen.
Enter the password by moving the cursor over the desired number and
clicking on it. As you enter each digit, the circles beside "Supervisor
Password" fill in and move to the right. Once you have entered all four
digits, click on OK. If you have entered the correct four-digit number, the
Main Menu will appear. If you have entered an incorrect number,
Incorrect Password displays for ten seconds then the unit returns to a
live display.
The factory default passwords are listed in the Technical Specifications.
Click on Cancel to exit the Supervisor Password screen and return to live
display.
9
Advertisement
Table of Contents
