VCR System Setup
< Figure 33 > VCR System Setup screen.
The VCR System Setup screen is used to synchronize the
with your VCR.
NOTE : If your VCR has a synchronizing trigger pulse, using it will save
you a lot of time when setting up your system.
• VCR Input :
There are two options for multiplexer input from the
VCR: BNC and S-Video.
• External Trigger :
synchronizing trigger pulse. When using your VCR's synchronizing
trigger pulse, set to match the VCR's signal; + for positive edge
sensing and – for negative edge sensing.
• Panic Rec Buzzer :
seconds.
• VCR Type :
Selecting this brings up a list of VCRs. Select your VCR
from the list. If your VCR is not on the list select User Define.
Set to Off if you are not using the VCR's
When On, the buzzer will beep every 20
41
multiplexer