Hyundai HSH-I073NBE Service Manual page 51

Operation Details
Remote controller
12
13
1
4
6
7
2
3
Note: Each mode and relevant function will be further specified in following pages.
Remote Control
The remote controller is not presetting as Cooling Only Air Conditioner or Heat Pump by manufacturer.
Each time after the remote controller replace batteries or is energized, the arrowhead will flashes on the front of
Heat or Cool on LCD of the remote controller.
User can preset the remote controller type depending on the air conditioner type you have purchased as
follows:
Press any button when the arrowhead flashes on the front of
Press any button when the arrowhead flashes on the front of
If you don t press any button within 10 seconds, the remote controller is preset as Heat Pump automatically.
Note :
If the air conditioner you purchased is a Cooling Only one, but you preset the remote controller as Heat Pump, it
doesn t bring any matter. But if the air conditioner you purchased is a Heat Pump one, and you preset the
remote controller as Cooling Only, then you CAN NOT preset the Heating operation with the remote controller.
TCL Air Conditioner Service Manual
TEMP UP button
1
Increase the temperature or time by 1 unit.
2
Decrease the temperature or time by 1 unit.
ON/OFF button
3
To switch the conditioner on and off.
FAN SPEED button
4
To select the fan speed of auto/low/mid/high.
TIMER button
5
To set automatic
SLEEP button
14
6
To activate the function
16
7 ECO button
10 In cooling mode,press this button ,the temperature
will increase 2
8 In heating mode, press this button, the temperature
will decrease 2
5
8
MODE button
To select the mode of operation
9
SUPER button
9
In cooling mode, press this button, the unit will give
the maximum cooling temperature with 16
In heating mode, press this button, the unit will give
the maximum heating temperature with 31
9
10 SWING button
To activate or deactivate of the movement of the
12
DISPLAY button
To
13
HEALTHY button
To switch - on /off
which controls the ionizer or plasma generator only
for inverter type.
9
14 RESET button
This button is useless for wall-mounted type.
When you press "3D", the horizontal and vertical
vanes will swing together at the same time.
9 16
ANTI MILDEW button
To activate the function ANTI-MILDEW
51
TEMP DOWN button
switching-on/off.
SLEEP
on the base of setting temperature:
on the base of setting temperature.
.
DEFLECTORS
switch on/off the LED display (if present)
HEALTHY funtion. It is a button
Cool , Cooling Only is set.
Heat , Heat Pump is set.
.
.
.
.
.