Compliance; Installation; Table 1. Adtran Unit Compatibility; Table 2. Compliance Codes - ADTRAN 3192 HDSL4 Installation And Maintenance Practice

Installation

This version of the H4TU-R works with multiple list versions of the HDSL4 Transceiver Unit for the Central
Office (H4TU-C) and repeater (H4R) as listed in
The 3192 H4TU-R, Span Powered can be used with any H4TU-C to complete a fully span-powered HDSL4
circuit. Span power is provided from the H4TU-C.

Compliance

Table 2 shows the compliance codes for the 3192 H4TU-R, Span Powered. This product is intended for installation
in equipment with a Type "B" or "E" enclosure.
This product meets all requirements of Bellcore GR-1089-CORE (Class A2), ANSI T1.418-2002 and is NRTL
listed to the applicable UL standards.
2. INSTALLATION
After unpacking the unit, inspect it for damage. If damage is discovered, file a claim with the carrier, then contact
ADTRAN. Refer to Warranty and Customer Service
encoded and transmitted to the 3192 H4TU-R, Span Powered once the circuit has achieved synchronization. There
are no switch settings on the 3192 H4TU-R, Span Powered.
2
3192 H4TU-R, Span Powered Installation and Maintenance Practice
Table 1.

Table 1. ADTRAN Unit Compatibility

Unit Number
122x401L1 or L2
122x403L1 or L2
122x404L1 or L2
118141xL1
122x441L1
122x445L1
NOTE: x = any generic release number

Table 2. Compliance Codes

Code
Power Code (PC)
Telecommunication Code (TC)
Installation Code (IC)
C A U T I O N !
SUBJECT TO ELECTROSTATIC DAMAGE
OR DECREASE IN RELIABILITY.
HANDLING PRECAUTIONS REQUIRED.
on page 33 in this practice. The settings on the H4TU-C are
Description
220 H4TU-C
DDM+ H4TU-C
3192 H4TU-R
Total Access H4TU-C
T200 H4R
239 H4R
Input Output
C C
X X
A –
61223426L12-5A