Site Settings; About Site Settings; The Site Settings Options; Applying Site Settings - TANDBERG Content Server Administrator's Manual

Site Settings

About Site Settings

Administrators need to review and configure
options before putting the system into production.
The Site Settings page is automatically refreshed every 10
seconds.

The Site Settings options

Site Settings menu items include:
•
System Information
•
Gatekeeper Settings
•
Advanced H.323 Settings
•
SIP Settings
•
Authentication
•
API
•
User Properties
•
System Defaults
Table of
Introduction Installation
Contents

D13898.08

MAY 2009
Site Settings All changes made in the
The Site Settings page is available for editing even if the Content Server is in call. Most settings from the Site Settings page can be
changed and applied while the Content Server is in call.
The exceptions are
changes made in those fields will not be applied until all calls on the Content Server have finished.
If calls are in progress when the Save Settings button was clicked, the Content Server will automatically enter
mode. In this mode, the Content Server will not accept incoming calls or make outgoing calls.
The following indications are available that the Content Server is in
•
The Site Settings page will display: 'The TANDBERG Content Engine is currently in <number of live calls> calls. Your Content Server
is in a call and will not accept any further calls until all calls have ended and the settings have been applied or
•
The Create Conference interface will display 'There are no resources available to make a call, please try again later'.
•
The Server Overview page and the LCD panel will display: 'Reloading configurations'.
When the call or calls currently in progress are completed, new settings will be applied and the Content Server will be able to receive
and make calls.
The administrator may also choose to override the Configuration Reload mode and apply changes immediately by clicking on the
All Calls button in Site Settings, which will terminate calls on the Content Server.
TCS Backing up and
Quick Setup
Administration

Applying Site Settings

Site Settings page need to be confirmed by clicking the
Gatekeeper settings, Advanced H.323 settings,
Administrator Conference
Restoring Settings Setup
38
TANDBERG
Save button at the top or bottom of the page.
SIP settings, System name and Default Recording
Configuration Reload mode:
View
Appendices
Conferences
CONTENT SERVER
ADMINISTRATOR GUIDE
Alias. Any
Configuration Reload
End all calls.'
End