Installer Setting-Test Run Mode - LG Single "A" Service Manual

Part 2 Functions & Controls
Installer Setting -Test Run Mode
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
1
2
❈ 18˚C cooling, High Fan Speed, Airflow direction mode will be operated during 18 minutes with ignoring room tem-
perature.
❈ After running 18 minutes under test run mode, system will automatically turn OFF.
❈ In case of duct type, the Airflow UP/DOWN function is not displayed.
❈ During test run mode, receiving signal from wireless remote controller will release this operation.
If you press any kind of button, Test Run mode will be released.
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
1 Keep pressing
secs to enter installer setting mode until
code displayed in timer segment.
Function Code
2 Press button to start.
- 34 -
button setting for 4
Set
LGE Internal Use Only