Table of Contents
Advertisement
Settings - trial run
Installer Setting - Test Run Mode
The test mode must be run after installation.
Please refer to the product manual for details on operation.
• What is a trial run?
- Trial run is to confirm the installation status of the product, and its operation under
refrigeration, strong wind and compressor startup when room temperature is undetected.
INSTALLATION INSTRUCTION
1
Pressing the
key and
simultaneously for more than 3 seconds can
enter the manual setting mode of the system.
- After entering the manual setting mode,
press the
key to enter the trial run mode.
* Value for the trial run mode: 01
2
Press the
key to start the trial run mode,
and the content is displayed on the left figure.
3
After the setting is completed, pressing the
key and
key simultaneously for more
than 3 seconds can exit the manual setting
mode.
- If there is no key input signal for more than
25 seconds, it will also exit the manual
setting mode.
4
After 18 minutes trial run, the system will
automatically stop running and switch to
standby mode.
- The trial run mode will be forced to exit if
pressing any key during running.
25
key
Advertisement
Table of Contents
